• Address:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

Store Hours:
Mon–Thurs: 12:00 – 7:30PM
Fri: 12:00 – 6:45PM
Sat: 12:00 – 4:00PM
With exceptions for holidays.

Super-Gold+™

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond.

Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

  • No fumes
  • Do not attack white foam
  • Will not fog clear plastic
  • Bond foam to foam
  • Bond to white foam in less than 15 seconds
  • Flexible consistency for better shock absorption

Link back to Cyanoacrylate (CA) Glues

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics

 

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Super-Gold+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading ofthe adhesive. Insta-Set™ accelerator must be used when bonding two pieces of foam together. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.

 

Purchase Items