AUTOBORNE SEALER

AutoBorne Sealers (The starting foundation for any graphic, complete automotive or large-panel paintjob)

AutoBorne Sealers are a water-based epoxy which takes 48 hours to fully cure after application. Sealers may be taped on, sanded and Createx Colors products may be applied less than 30 minutes after application. Prior to applying solvent-based paint or clear direct to Sealers allow 48 hours cure time, sand or degrease prior to application. Sealers may be top-coated with solvent-based paint soon after application provided Sealers are wiped with degreaser or sanded. Applying Createx Colors paints direct to Sealers after application does not require sanding or degreasing. AutoBorne Sealers are universally compatible with any paint system and can be applied direct to other primer types such as DTM etch-primers used to treat bare metal before AutoBorne Sealer is applied.  

Apply direct to

• Aluminum
• Wood
• Urethane 
• Most plastics and basically any substrate
• when dry can be sanded with 1000 grit or finer sandpaper
• Water-based epoxy

Reduce 10% per volume with 4011 Reducer. AutoBorne Sealer is best applied with a 1.2 - 1.4mm tip-sized spray gun around 25 - 30 psi. For use with smaller tip-sizes such as mini-guns and an airbrush, reduce accordingly to achieve proper flow and atomization.