• ADDRESS:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

STORE HOURS:

Follow us on Instagram!

Mon - Fri 11:00AM - 4:00PM

 Sat 11:00AM-3:00PM

Closed Sunday

 

 

Original Store ! Carpe Diem:

3820 Valley Blvd Suite i, Walnut, CA 91789

Close
Search

Proxxon 2-Speed Scroll Saw DS 400

Vibration-reducing base housing of cast steel, neatly CNC-processed and powder-coated. For stability and working without vibrations.

Regular scroll saw blades are fastened by saw blade holders with high clamping force: This ensures true alignment in the saw arm. The machine has also been prepared for saw blades with pin ends that are used without blade holders. Extremely important for these types of scroll saws: A handy adjusting knob enables sensitive clamping of the saw blades.

 PX37094

  • Large saw table made of die-cast aluminum 400 x 250mm (16" x 10")
  •  Cutting performance : Wood 65mm (2 1/2") non-ferrous metals (depending on type) 10 - 15mm (3/8" - 5/8")
  • Also cuts Plexiglas, glass fibre reinforced plastic, foam, rubber, leather or cork
  • Includes 5 each coarse and fine saw blades
  • Blade replacement can be unlocked and pushed back

 

 

 

When cutting extremely hard work pieces (iron), the toothing in the contact area becomes worn quickly. The upper part of the blade toothing can be used by increasing the work piece support surface.

 

 

Be Advised :
Other accessories sold separately

Blade holders for DS 460  (one pair is already included with the machine)

For clamping regular saw blades with high clamping force: for true alignment of the saw arm.

PX27096

 

Hard materials such as steel and PERTINAX

Standard-toothed blades, No. 5: 36 TPI. 5.1" (130 x 0.85 x 0.4mm) 12 pieces

PX28112

 

Fine-toothed blades, No. 3: 41 TPI. 5.1" (130 x 0.75 x 0.36mm) 12 pieces

PX28113

 

Very fine-toothed blades, No. 1: 50 TPI.  5.1" (130 x 0.6 x 0.3mm) 12 pieces

PX28114

 

For cutting hard and soft woods, plastic, Perspex and soft non-ferrous metal.

Coarse-toothed blades, No. 9: 14 TPI. 5.1" (130 x 1.50 x 0.48mm) 12 pieces

PX28116

 

Standard-toothed blades, No. 5: 17 TPI. 5.1" (130 x 1.20 x 0.38mm) 12 pieces

PX28117

 

Fine-toothed blades, No. 3: 20 TPI. 5.1" (130 x 0,77 x 0.34mm) 12 pieces

PX28118

 


For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.

Coarse-toothed (10 TPI) 5" (127 x 2.61 x 0.51mm) 12 pieces

PX28741 

 

For cutting thin materials, soft and hard wood as well as plastics.

Normal toothed (18 TPI) 5" (127 x 1.86 x 0.24mm) 12 pieces

PX28743

 

For cutting non-ferrous metals, glass-fibre reinforced plastics, plastics, Plexiglas and wood.

Fine-toothed (25 TPI) 5" (127 x 1.76 x 0.25mm) 12 pieces

PX28745

 

These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5mm (1/16") hole is required. Ideal for plastic, hard and soft woods.

130 x 1.2mm (5.1") 12 pieces

PX28747