Longneck Angle Grinder LHW/E

The long slim die-cast head makes these sanders preeminently versatile!

This light, compact and user-friendly unit is the real alternative to pneumatic tools for grinding, deburring, roughing, finishing – wherever working in tight spaces. The powerful permanent magnet motor has a high lifetime and performs with high torque. The Longneck Angle Grinder LHW/E is supplied in a new, high-quality PP storage case. It has a strong frame, is extremely stable and large enough to repack in the case without "fiddling around". 

PX38544

• Complete with one aluminum-oxide grinding disc (60 grit), one flap disc (100 grit) and one aluminum-oxide cut-off wheel.
• Great for paint and rust removal, cutting small components and sharpening tools

Additional parts sold seperatly 

Backing Disc for LHW/E

Hook and loop type, for use with sanding discs and sanding fleece.

PX28548

Corundum Sanding Discs for LHW/E

Hook and loop type, used on flat and convex surfaces.

PX28549

Velcro type, used on flat and convex surfaces. 150 Grit, Set of 12

PX28550

Sanding Fleece for LHW/E
Hook and loop type, used for cleaning, matting and sanding of steel, stainless, steel, non-ferrous metals. Also used for paint removal.

PX28554 Medium Set of 5

PX28555 Fine Set of 5

Corundum Grinding Disc for LHW/E

Ideal for grinding, deburring, sharpening, rust removal and roughing of steel and non-ferrous metal.

PX28585

Silicon-Carbide Grinding Disc for LHW/E

Ideal for grinding, deburring, sharpening, rust removal and roughing of stone, glass, ceramics and other very hard materials. 60 grit

PX28587

Flap Disc for LHW/E

The flap disc is made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing of cast iron, gray cast iron, stainless steel, steel, non-ferrous metal, wood and plastic. 100 grit

PX28590

Disc with tungsten carbide burrs for LHW/E

Carving wheel with needle-like tungsten carbide teeth. Ideal for carving and sculpting, roughing and finishing in wood plastics and fiberglass. Smooth cutting and excellent control. Maximum RPM 15,000. Do not use on metal. 

PX29050

Cut-off wheel for long neck angle grinder

Ideal for cutting steel, non-ferrous metals, smaller plastic and wooden bars. Set of 5

PX28155

Diamond-coated cutting and roughing disc

For cutting, grinding, and roughing of hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 1mm. With 10mm bore.

PX28557

Diamond-coated cutting disc

For fine cuts in hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 0.6mm. With 10mm bore.

PX28558

Made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing of cast iron, gray cast iron, stainless steel, steel, non-ferrous metal, wood and plastic. Ø 50mm with 10mm bore.

PX28591

Proxxon Tungsten Carbide rasp and roughing disc for LHW/E

Highstock removal  in wood  and soft materials. Cranked design for convenient shaping and modeling in wood, gypsum and horn (animal hooves). Less heating up due to holes.  Ø 50mm with 10mm bore 

PX28559