Proxxon Cordless Long Neck Angle Grinder LHW/A

For working on steel, non-ferrous metal, glass, ceramics, wood and plastic. For cutting, roughing and grinding.

The Cordless Longneck Angle Grinder LHW/E is supplied in a new, high-quality PP storage case. It has a strong frame, is extremely stable and large enough to repack in the case without "fiddling around". With lateral sticker for identification of the content.

Supplied with corundum grinding disc (60 grit), fan sander (100 grit) and reinforced cutting disc. Set includes lithium-ion battery Li/A2 (10.8V) and rapid battery charger LG/A. The LHW/A is top-quality and its performance is comparable to our mains-powered counterparts. For outdoor jobs or if an extension lead needs to be used, this tool is very utile. Gear head of die-cast aluminium. Main housing of glass-fibre reinforced POLYAMIDE with soft component in grip area. One battery charge for at least 30 minutes and The flat end cap of the battery enables the tool to stand upright as well.

 PX39815

 

• High quality 10.8V lithium-ion battery with 2.6Ah for highest performance
• 10.8V DC. Spindle speeds 1,100 - 2,800rpm. Length 305mm (12"). Weight 950g (2 lbs) (including battery)
• Includes 1 lithium-ion battery Li/A2 (10.8V) and 1 rapid battery charger LG/A
• 1 Corundum grinding disc (60 grit), 1 fan sander (100 grit) and 1 reinforced cutting disc included
  

 

 

Be Advised :

Other extra accessories not included

 

Cut-off wheel for long neck angle grinder

Ideal for cutting steel, non-ferrous metals, smaller plastic and wooden bars. Set of 5

PX28155

 

Diamond-coated cutting and roughing disc

For cutting, grinding, and roughing of hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 1mm. With 10mm bore.

PX28557

 

Diamond-coated cutting disc

For fine cuts in hard materials such as glass, porcelain, ceramics and stone. Less heating up due to cooling holes. Ø 50 x 0.6mm. With 10mm bore.

PX28558

 

 

Proxxon Tungsten Carbide rasp and roughing disc for LHW/E

Highstock removal  in wood  and soft materials. Cranked design for convenient shaping and modeling in wood, gypsum and horn (animal hooves). Less heating up due to holes.  Ø 50mm with 10mm bore

PX28559

 

Corundum Grinding Disc for LHW/A
Ideal for grinding, deburring, sharpening, rust removal and roughing of steel and non-ferrous metal.

PX28585

 

 

Silicon-Carbide Grinding Disc for LHW/A
Ideal for grinding, deburring, sharpening, rust removal and roughing of stone, glass, ceramics and other very hard materials.
PX28587

 

 

Flap Disc for LHW/E

The flap disc is made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing of cast iron, gray cast iron, stainless steel, steel, non-ferrous metal, wood and plastic. 100 grit

PX28590

 

Made from aluminum-oxide with a high stock removal rate and is ideal for grinding and smoothing of cast iron, gray cast iron, stainless steel, steel, non-ferrous metal, wood and plastic. Ø 50mm with 10mm bore.

PX28591

 

Disc with tungsten carbide burrs for LHW/E

Carving wheel with needle-like tungsten carbide teeth. Ideal for carving and sculpting, roughing and finishing in wood plastics and fiberglass. Smooth cutting and excellent control. Maximum RPM 15,000. Do not use on metal.

PX29050