Candy2o

candy₂O are concentrate

Add 4030 Balancing Clear or 4050 UVLS Clear 10% per volume (9:1 mix ratio) for spray performance. Candy₂O work with a wide variety of spray-gun and airbrushes. The following specs are recommended as a starting point. As always, achieving a finely atomized spray pattern is the goal. Reduce and adjust settings & psi to achieve a spray pattern that is smooth and free of large, color droplets or a grainy over-spray look. 4 - 6 medium wet coats are recommended for full color saturation. Allow each coat to air dry tack free prior; approximately 10 minutes flash time in between coats when painting in non-humid, temperate conditions.

4600 Series: Brilliant transparent colors for custom refinishing and airbrushing.

• Water-soluble
• Urethane resin
• Crystal-clear dyes to create truly exceptional candy colors.
• Optional lowering of viscosity is achieved by reducing with either 4012 High Performance or 4020 Automotive Reducer

candy₂O are made for the graphic arts with excellent adhesion so they will not lift or peel when taped on. Apply 4040 Bleed Checker over air-dried candy2O to prevent bleeding when applying other colors and marking when taping.