• ADDRESS:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

STORE HOURS:

Mon - Friday - 12:00PM - 5:00PM

Please Wear a Mask at all times in our store.

Saturday - 11:00am -3:00PM

Closed Sunday

 

Close
Search

AC Adapter NG 5/E

Tool and accessories not included.

The thyristor electronic control (with feedback) allows for optimum tool speed and high torque at low speeds. It provides a master switch for turning off the transformer without needing to unplug. A PTC (positive temperature coefficient) element guarantees protection against overload, the plugged in machine will not restart automatically. After cooling down, the AC wall plug should briefly be unplugged to reset the adapter

  • Electronic speed control
  • Primary supply at 110 - 120V
  • Three polarized sockets for MICROMOT machines (three different tools can be plugged in at a time)
  • Has a capacity of 5.0A at 16V no load 
  • 12 Volt under load = 60VA (DC)
  • Storage holes for insert bits and cutters with shafts of 3/32" and 7/64" (2.35 and 3mm)
  • One pair of sockets for standard banana plugs with 5/32" (4mm) diameter.

 

Optimal power source for:
Rotary Tool MICROMOT 60
Rotary Tool MICROMOT 60/E
Rotary Tool MICROMOT 60/EF
Pensander PS 13
Jig Saw STS 12/E
Engraver GG 12
Precision Drill Grinder FBS 12/EF

 

Note:
Power consumption of portable machine tools is measured according to the internationally accepted ICE-745-1 specification. The current drawn is measured, not the power consumption with a hot motor just before stalling. In practice, this condition seldom appears, if ever. All PROXXON AC adapters are suitably dimensioned for the recommended purposes.