• ADDRESS:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

STORE HOURS:

Mon - Friday - 12:00PM - 5:00PM

Please Wear a Mask at all times in our store.

Saturday - 11:00am -3:00PM

Closed Sunday

 

Close
Search

Proxxon Accessories and Tools for Lathe and Miller Systems

Proxxon Accessories and Tools for Lathe and Miller Systems

 

 

  • Universal dividing attachment UT 250

For accurate machining of circular work pieces. Used to manufacture sprockets, gears, ratchets, cams, etc. For fixation on compound table KT 150 and milling machines FF 230 and FF 500/BL. Worm drive for divisions through 360°. Feed adjustment by handwheel with graduated, zero-adjustable dial (1 revolution = 10°). Unit may be fixed horizontally or vertically. For compound tables with distances between T-slots of 45 - 60mm. The flange of the dividing attachment is the same size as that of the main spindle of the PD 250/E lathe, thus 3 jaw chuck (PX24034) and 4 jaw chuck (PX24036) may be mounted. 

PX24046

 

  • Radius Cutting Attachment

Mounted on the cross slide in place of the tool holder. For producing convex and concave shapes, for turning radii or 3/4 spheres up to max. 32mm. Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD and older PROXXON lathes. Dimensions: base plate 67 x 50mm, height 55mm. Complete with finishing cutter 8 x 8 x 80mm. In wooden box with sliding lid.

PX24062

 

  • Die Holder for round dies, threads M 3 to M 10

Sizes: M 3 - 4 - 5 - 6 - 8 - 10. The straight shank 13/32" fits our drill chuck NO 24 020 when mounted in the tailstock of the PD 250/E. The holder is held by hand while cutting the threads. Comes in a wooden box.

PX24082

 

  • Tool Holder for rotary tools. For use on lathe machines

This holder allows mounting of our rotary tool IBS/E (collar size 20mm (4/5")) to the tool post of the Lathe PD 250/E for grinding or polishing purposes.

PX24098

 

  • Parting tool holder and tool

Used in the PD 250/E quick change system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.

PX24217

 

  • Precision Machine Vice

Milled in steel. Can be used on its side and back. Width of jaws 2 3/8" (60mm), clamping capacity 1 2/3" (42mm). Complete with mounting bolts. Packed in a wooden box.

PX24255

 

  • Step Clamp Set

Made of steel. Complete with 2 step blocks, 2 clamps, 2 nuts and 2 T-slot nuts for MICROMOT standard (29/64" x 7/16" x 5/32" / 11.5 x 11 x 4mm). For use with the lathe systems PD 230/E, KT 150 and MF 70

PX24256

 

 

  • Step Clamp Set

Consists of 2 step blocks and 2 clamps, 2 nuts, 2 T-slot nuts. Secures objects to approx. 1 3/8" (35 mm) high. May be used with PD 230/E and FF 230. Supplied in wooden box

PX24257

 

  • Precision Steel Vice PM 40

Especially suited for intricate and accurate working! Milled of steel. Completely angular. Jaw width 1 13/16" (46mm), clamping capacity 1 3/16" (30mm). Total length 2 3/4" (70mm). Ideal for working with MICRO Mill MF 70 or Compound Table KT 70. Slot stones and fixing screws included. Comes in a wooden box.

PX24260

 

 

  • Precision V-Blocks

Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm (2" x 1 3/16" x 1 3/16" ). The solid clamp and knurled knob ensure superb securing of the work piece.

PX24262

 

  • 14-piece parallel supports set

Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.

PX24266

 

  • Edge Finder Set

Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50 mm (15/64" x 15/64" x 2") and 6 x 5 x 75mm (15/64" x 3/16" x 3"). Comes in a wooden box.

PX24434

 

  • HSS Boring Tool Set

One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 1.3mm (3/64"), 2.65mm (7/64") and 4mm (5/32"). Shank: 6mm (15/64"). Length: 95 mm (3 3/4"). The cutters are held by a tool holder that mounts to the tool post of the PD 250/E. Comes in a wooden box.

PX24520

 

 

  • 6-piece turning tool set. Made of high-quality cobalt HSS steel. Ground.

One each boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 65mm (15/64" x 15/64" x 2 1/2". For FD 150/E, supplied in wooden box.

PX24524

 

  • Five Piece Cutting Set

8 x 8 x 80mm (5/16" x 5/16" x 3 9/64"). One each roughing out, parting, finishing cut, left and right cutter. Made from high-quality Cobalt HSS, pre-ground. Packaged in a wooden box.

PX24530

 

 

  • Three Piece Thread Cutting Set

6 x 8 x 80mm (15/64" x 5/16" x 3 9/64"). One cutter for external thread (ground to 60°, metric), one for internal thread, one general cutting. Made from high-quality Cobalt HSS, pre-ground. Packaged in a wooden box.

PX24540

 

  • Spare tool for parting tool

Cutter 12 x 3 x 85 mm. The depicted parting tool holder is not included

PX24554

 

  • Cutter Set with tungsten inserts

Three holders (5/16" x 5/16" x 3 35/64"), for roughing out, finishing cuts and boring bar, holes from 15/32". Standard tungsten tips, 55°, plated. Three additional inserts, securing screws and key TX8 are included.

PX24555

 

  • Tungsten Disposable Tips

For the holders 24 555. Ten piece set.

PX24557

 

  • Tool holder 8 x 8 x 60mm

Holder angled to the left by 45 degree for cylindrical carbide inserts with diameter 6mm. For extra high surface quality and low surface roughness, for turning radii and cutting round grooves. Set includes two tungsten inserts, two insert securing screws and TX 8 key. 8 x 8 x 60mm.

PX24560

 

  • Tungsten carbide inserts, 10 pcs.

Carbide inserts, diameter 6mm. 10 pieces. The tool holder is not included

PX24564

 

  • Milling Cutter Set 5/64" - 13/64" (2 - 5mm)

HSS, all with 15/64" (6mm) shank. Cutters of Ø 5/64", 7/64", 5/32" and 13/64" (2, 3, 4 and 5mm). Double fluted. Supplied in wooden box.

PX24610

 

 

  • Milling Cutter Set 15/64" - 13/32" (6 - 10mm)

HSS, 4 cutters 6mm (15/64"), 7mm (9/32"), 8mm (5/16") and 10mm (13/32"). Four flute design. Supplied in wooden box.

PX24620

 

  • Three Piece Center Drill Set

HSS, 60°. Complete set with sizes of 2, 2.5 and 3.15mm (5/64", 3/32", 1/8"). Made from high-quality Cobalt HSS, pre-ground. Packaged in a wooden box.

PX24630