• ADDRESS:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

STORE HOURS:

Mon - Friday - 12:00PM - 5:00PM

Please Wear a Mask at all times in our store.

Saturday - 11:00am -3:00PM

Closed Sunday

 

Close
Search

Proxxon MICRO Mill FF 230

A small, high accuracy machining system to mill, drill and bore.

The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic.

PX34108

  • 110-120V
  • Headstock Swivels 360°
  • Height is Adjustable
  • Quill and Headstock may be locked in position

 

Be Advised :
Other extra accessories not included

 

Universal dividing attachment UT 250

For accurate machining of circular work pieces. Used to manufacture sprockets, gears, ratchets, cams, etc. For fixation on compound table KT 150 and milling machines FF 230 and FF 500/BL. Worm drive for divisions through 360°. Feed adjustment by handwheel with graduated, zero-adjustable dial (1 revolution = 10°). Unit may be fixed horizontally or vertically. For compound tables with distances between T-slots of 45 - 60mm. The flange of the dividing attachment is the same size as that of the main spindle of the PD 250/E lathe, thus 3 jaw chuck (PX24034) and 4 jaw chuck (PX24036) may be mounted.

PX24046

 

Drill Chuck

German industrial drill chuck for MICRO Mill PF 230 and FF 230 with 13/32" (10mm) capacity and 13/32" (10mm) arbor to fit the 10mm collet.

PX24110

 

Fine Feed for Mill/Drill Head PF 230 and MICRO Milling Machine FF 230

The feed may now be used via the height feed (vertical) or the fine feed in the tilted position. One revolution is equivalent to 1/16" (1.5mm) spindle travel, with 1 division = .002" (0.05mm). The graduated scale can be reset to zero.

PX24140

 

Five Piece Collet Set for PF 230 and FF 230

Includes 1 each collet for round stock 3/32", 7/64", 1/8", 5/32" and 13/64" (2.4 - 3.0 - 3.2 - 4.0 and 5.0mm). Supplied in a wooden box and lid.

PX24144

 

Precision Machine Vice

Milled in steel. Can be used on its side and back. Width of jaws 2 3/8" (60mm), clamping capacity 1 2/3" (42mm). Complete with mounting bolts. Packed in a wooden box.

PX24255

 

Step Clamp Set 

Made of steel. Complete with 2 step blocks, 2 clamps, 2 nuts and 2 T-slot nuts for MICROMOT standard (29/64" x 7/16" x 5/32" / 11.5 x 11 x 4mm). For use with the lathe systems PD 230/E, KT 150 and MF 70

PX24256

 

Step Clamp Set

Consists of 2 step blocks and 2 clamps, 2 nuts, 2 T-slot nuts. Secures objects to approx. 1 3/8" (35 mm) high. May be used with PD 230/E and FF 230. Supplied in wooden box

PX24257

 

Precision V-Blocks

Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 2" x 1 3/16" x 1 3/16" (50 x 30 x 30mm). The solid clamp and knurled knob ensure superb securing of the work piece.

PX24262

 

Splash guard and chip collecting tray

Made of 1/16" (1.5mm) thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). 27 1/2" x 16/12" x 1 37/64" (L 700mm, W 420mm, H 40mm).

PX24322

 

Edge Finder Set

Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 15/64" x 15/64" x 2" (6 x 6 x 50 mm) and 15/64" x 3/16" x 3" (6 x 5 x 75mm). Comes in a wooden box.

PX24434

 

Milling Cutter Set 5/64" - 13/64" (2 - 5mm)

HSS, all with 15/64" (6mm) shank. Cutters of Ø 5/64", 7/64", 5/32" and 13/64" (2, 3, 4 and 5mm). Double fluted. Supplied in wooden box.

PX24610

 

Milling Cutter Set 15/64" - 13/32" (6 - 10mm)

HSS, 4 cutters Ø 15/64", 9/32", 5/16" and 13/32" (6, 7, 8 and 10mm). Four flute design. Supplied in wooden box.

PX24620

  

Three Piece Center Drill Set

HSS, 60°. Complete set with sizes of 2, 2.5 and 3.15mm (5/64", 3/32", 1/8"). Made from high-quality Cobalt HSS, pre-ground. Packaged in a wooden box.

PX24630