• ADDRESS:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

STORE HOURS:

Mon - Friday - 12:00PM - 5:00PM

Please Wear a Mask at all times in our store.

Saturday - 11:00am -3:00PM

Closed Sunday

 

Close
Search

Proxxon MICRO Mill MF 70

Proxxon Micro Mill MF 70

Stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. The headstock, made of die-cast aluminum, houses the 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.35, 3.0, 3.2mm). The table is fitted with three T-slots of the 15/32" x 15/64" x 13/64" (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. 

 

  • Axes are play-free and have adjustable slides
  • Headstock made of die-cast aluminum
  • Continuously variable speeds from 5,000 - 20,000rpm, perfect for even the smallest milling cutter.
  • Hand wheels with zero adjustable scales: 1 revolution = 3/64" (1.0mm), 1 division = .002" (0.05mm).
  • Six triple slit MICROMOT Steel Collet Set, triple slit and hardened, from 1.0 to 3.2 mm.
  • Supplied complete with stepped clamp blocks of steel.

 

Optionally this machine may also be used with PX28941

Be Advised :
Other extra accessories not included

 

Step clamps steel made

Included in the compound table but can be ordered separately (2 step blocks and clamps, T-slot nuts of MICROMOT standard, bolts). This set also fits the Mill/Lathe System PD 230/E and FF 230, secures objects to approx. 0.7"

PX24256

 

Precision Steel Vice PM 40

Especially suited for intricate and accurate working! Milled of steel. Completely angular. Jaw width 1 13/16" (46mm), clamping capacity 1 3/16" (30mm). Total length 2 3/4" (70mm). Ideal for working with MICRO Mill MF 70 or Compound Table KT 70. Slot stones and fixing screws included. Comes in a wooden box.

PX24260

 

Dividing Attachment for MICRO Mill MF 70 and MICRO Compound Table KT 70

Designed for use with the MICRO Compound Table KT 70 which is identical to the X-Y table of the MICRO Mill MF 70. All provided fixing holes match the slot distance of the above items, so that it can be mounted in no time with the included clamping parts either standing or lying on the table. When using it standing upright, also long work pieces can be worked on, as they can be pushed through a hole provided in the base plate. In wooden box with sliding lid.

PX24264

 

14-piece parallel supports set

Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.

PX24266

 

Milling Cutters

These double flute cutters are made from solid tungsten and are to be used for clockwise cutting. The fishtail profile ensures cutting to the center, allowing boring. Usable on cast iron, hardened cast iron, steel, cast steel, brass, aluminum, and even glass, plastics and carbon fiber. The set includes one each of 1/32", 5/64" and 7/64" (1.0, 2.0 and 3.0mm) shank diameter: 7/64" (3.0mm).

PX27116

 

Machine Vice MS 4

Die-cast zinc. With three machined sides. The slot fits the adjustable fence of the drill stand MB 200 and the bench drill press TBM 115. Horizontal and vertical V-slots in jaw. Jaw width 2" (50mm) and height 2/5" (10mm). Maximum clamping width 1 11/32" (34mm).

PX28132

 

 

 

Proxxon Tungsten Carbide Milling Cutter, Ø 5/128''

For working on excessively hard materials: steel, cast steel, non-ferrous metals, plastics. Vibration-free milling of high accuracy dimensions. Ideal for technical work, engraving or milling circuit-boards. Shanks Ø 7/64" (3mm) or Ø 3/32" (2.35mm).

PX28758

 

Proxxon Tungsten Carbide Milling Cutter, Ø 5/64''

For working on excessively hard materials: steel, cast steel, non-ferrous metals, plastics. Vibration-free milling of high accuracy dimensions. Ideal for technical work, engraving or milling circuit-boards. Shanks Ø 7/64" (3mm) or Ø 3/32" (2.35mm).

PX28759