• ADDRESS:
  • 1324 S. Flower St
  • Los Angeles, CA 90015
  • Tel: 213.663.1400

STORE HOURS:

Mon - Friday - 12:00PM - 5:00PM

Please Wear a Mask at all times in our store.

Saturday - 11:00am -3:00PM

Closed Sunday

 

Close
Search

Proxxon Mill/Drill Head PF 230

The Mill/Drill Head PF 230 converts your Lathe PD 250/E into a machining center.

The Mill/Drill Head PF 230 comes with a column size 1 3/8" x 15 3/4" (35 x 400mm) including the necessary mounting bracket and bolts to attach it to the Lathe PD 250/E. The lathe's top slide is then replaced with the table (supplied with the Mill/Drill Head PF 230). The table has a size of 4 5/16" x 2 3/4" (110 x 70mm) and 3-T slots 15/32" x 15/64" x 15/64" (12 x 6 x 6mm). The lathe now functions as a compound table, with X-Y travel being longitudinal and cross-wise respectively. Three collets of sizes 15/64" - 5/16" and 25/64" (6, 8, 10mm) are included. 110 - 120V, 60Hz, 140W (0.1877hp)

 PX34104

  • 3-T slots 15/32" x 15/64" x 15/64" (12 x 6 x 6mm)
  • Three collets of sizes 15/64" - 5/16" and 25/64" (6, 8, 10mm) included
  • Table has a size of 4 5/16" x 2 3/4" (110 x 70mm)
  • speeds 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm

 

 

Be Advised :
Other extra accessories not included

 

Drill Chuck

German industrial drill chuck for MICRO Mill PF 230 and FF 230 with 13/32" (10mm) capacity and 13/32" (10mm) arbor to fit the 10mm collet.

PX24110

 

Five Piece Collet Set for PF 230 and FF 230

Includes 1 each collet for round stock 3/32", 7/64", 1/8", 5/32" and 13/64" (2.4 - 3.0 - 3.2 - 4.0 and 5.0mm). Supplied in a wooden box and lid.

PX24144

 

Precision Machine Vice

Milled in steel. Can be used on its side and back. Width of jaws 2 3/8" (60mm), clamping capacity 1 2/3" (42mm). Complete with mounting bolts. Packed in a wooden box.

PX24255

 

Step Clamp Set 

Made of steel. Complete with 2 step blocks, 2 clamps, 2 nuts and 2 T-slot nuts for MICROMOT standard (29/64" x 7/16" x 5/32" / 11.5 x 11 x 4mm). For use with the lathe systems PD 230/E, KT 150 and MF 70

PX24256

 

Step Clamp Set

Consists of 2 step blocks and 2 clamps, 2 nuts, 2 T-slot nuts. Secures objects to approx. 1 3/8" (35 mm) high. May be used with PD 230/E and FF 230. Supplied in wooden box

PX24257

 

Precision V-Blocks

Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 2" x 1 3/16" x 1 3/16" (50 x 30 x 30mm). The solid clamp and knurled knob ensure superb securing of the work piece.

PX24262

 

14-piece parallel supports set

Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.

PX24266

 

Splash guard and chip collecting tray for PROXXON milling machines

Made of 1/16" (1.5mm) thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). 27 1/2" x 16/12" x 1 37/64" (L 700mm, W 420mm, H 40mm).

PX24322

 

Edge Finder Set

Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 15/64" x 15/64" x 2" (6 x 6 x 50 mm) and 15/64" x 3/16" x 3" (6 x 5 x 75mm). Comes in a wooden box.

PX24434

 

Milling Cutter Set 5/64" - 13/64" (2 - 5mm)

HSS, all with 15/64" (6mm) shank. Cutters of Ø 5/64", 7/64", 5/32" and 13/64" (2, 3, 4 and 5mm). Double fluted. Supplied in wooden box.

PX24610

 

Milling Cutter Set 15/64" - 13/32" (6 - 10mm)

HSS, 4 cutters Ø 15/64", 9/32", 5/16" and 13/32" (6, 7, 8 and 10mm). Four flute design. Supplied in wooden box.

PX24620

 

Three Piece Center Drill Set

HSS, 60°. Complete set with sizes of 2, 2.5 and 3.15mm (5/64", 3/32", 1/8"). Made from high-quality Cobalt HSS, pre-ground. Packaged in a wooden box.

PX24630