Alumilite Casting Resin

Alumilite Clear Kit - 16oz & 32oz

Alumilite's Amazing Clear Cast is a clear casting and coating system that cures to a rigid, durable, clear plastic. Use Amazing Clear Cast for coating or finishing applications such as bar tops, floors, taxidermy scenery, lenses, and all sorts of other clear casting or coating applications. Amazing Clear Cast is an easy to use, 1:1 mix ratio system that cures overnight which allows time for air bubbles to evacuate prior to curing. Amazing Clear Cast can be colored with Alumilite dyes, alcoholic inks, or other non-water base colorants.
Complies with FDA CFR 177.2600

Alumilite's White also known as Amazing Casting Resin provides users with an extremely user friendly rigid urethane that has good overall physical and cosmetic properties. The low viscosity along with the white appearance makes this material ideal for users who are looking for perfect cosmetics in their castings. The material has a mixed viscosity less than 100 cps and a mix ratio of 1:1 by weight or by volume. The material features a 2.5-3 minute work time and transitions from clear to opaque white to let the user know when the pot life is expiring. Demold time typically ranges from 5 to 15 minutes depending on the mold temperature and the mass of the material being cast. We always recommend warming the mold before casting to achieve a more consistent and thorough cure.

Amazing Clear Cast Plus epoxy(UV Protection) AU1060116oz, AU10602 32oz and AU10603 1gal

Same great features of our Amazing Clear Cast including an easy to use 1:1 mix ratio by volume, a brilliant high-gloss durable surface and is FDA compliant. Now bringing the added benefit of industry-leading UV resistance. Can be colored with Alumilite dyes, alcoholic inks, or other non-water based colorants and is compliant with FDA 21 CFR 175.300.

Amazing Deep Pour (clear) AU10610 24oz 

5-7 day full cure (2 parts A to 1 part B) by volume

2-part, extremely clear, deep-cast epoxy. It is ideal for applications requiring thicker pours (up to 2 inches thick) or a glass-like finish. This 2:1 mix ratio product was formulated to reduce exotherm (heat build-up), allowing users to pour thicker sections without the delays of layering as with standard epoxies. Compatible with Alumilite Dyes and Polycolor Resin Powders, Glow Powders, and Glitters. Other colorants may be compatible, testing is required. This epoxy is ideal for river tables, resin blanks for lathe turning, filling wide gaps in wood, or any application requiring a depth greater than 3/8 inch. Also be layered for projects requiring thicknesses beyond 2 inches. Low exotherm and viscosity for easy mixing with a long open time to allow for air bubble release. 24-72 hour tack-free time (mass and temperature are factors) and compliant with FDA 21 CFR 175.300 2:1